BS ISO 9448-4:2013 BSl Standards Publication Tools for pressing Guide bushes Part 4: Form C, gliding bushes, headed type 1 bsi. ..making excellence a habit: BS ISO 9448-4:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 9448-4:2013. It supersedes BS 7568-20:1992 (ISO 9448-4:1991) which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MTE/12, Tools for pressing and moulding. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @The British Standards Institution 2014. Published by BSI Standards Limited 2014 ISBN9780580770104 ICS 25.120.10 Compliancewitha British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2014. Amendments/corrigenda issued sincepublication Date Text affected BS ISO 9448-4:2013 ISO INTERNATIONAL STANDARD 9448-4 Second edition 2013-12-15 Tools for pressing - Guide bushes Part 4: Form C, gliding bushes, headed, type 1 Outillagedepresse-Baguesdeguidage- Partie 4: Forme C, bagues d collerette pour guidage lisse, type 1 Reference number ISO 9448-4:2013(E) TO @ ISO 2013 BS ISO 9448-4:2013 IS0 9448-4:2013(E) COPYRIGHTPROTECTEDDOCUMENT @IS0 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISo's member body in the country of the requester. ISO copyright office Case postale 56.CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland ii ISO 2013-Allrights reserved BS ISO 9448-4:2013 IS09448-4:2013(E) Contents Page Foreword iv 1 Scope .1 2 Dimensions. .1 3 Material. .3 4 Designation. .3 Bibliography. 4 @ IS0 2013 - All rights reserved iii BSISO 9448-4:2013 IS0 9448-4:2013(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (Iso member bodies). The work of preparing International Standards is normally carried out through Iso technical committees.Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with Iso, also takepart in the work. ISo collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISo/IEC Directives, Part 1.In particular the different approval criteria needed for the different types of IsO documents should be noted.This document was drafted in accordance with the editorialrulesoftheISo/IECDirectives,Part2.www.iso.org/directives Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IsO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of thedocumentwill be in the Introductionand/or ontheIsolistofpatentdeclarations received.www.iso.org/patents Any trade name used in this document is information given for the convenience of users and does not constituteanendorsement. For an explanation on the meaning of Iso specific terms and expressions related to conformity assessment,as wellas information aboutIsO's adherencetotheWTOprinciples inthe Technical Barriers toTrade (TBT)seethefollowing URL:For