学术文献库

The orthogonal frequency division multiplexing is a very efficient modulation technique that can achieve very high throughput by transmitting many carriers simultaneously and it is spectrally efficient because of the proximity of the subcarriers. OFDM is used in 5G communication for higher data transmission. 6th generation communication also demands OFDM, since it is more spectrally efficient and suitable for high data transmission. The drawback of the OFDM includes peak to average power ratio and sensitivity to carrier offsets and drifts. The usage of a non-linear power amplifier causes the signal spreading and leads to inter-modulation and signal constellation distortion. These two distortions have an impact on the signal-to-noise ratio and hence reduce the efficiency. The methods used to reduce PAPR are clipping and filtering, selective mapping, partial transmit sequence, tone reservation, and injection and non-linear commanding. The drawbacks of the above methods are computational complexity, spectrum inefficiency, increase in bit error rate and PAPR rate. In this work, three effective methods are discussed and compared to improve the performance parameters. These are adaptive peak window method based on harmonize clipping, harmonics kernel adaptive filter and Slepian-based flat-top window techniques are presented to reduce the BER, PAPR, and CCDF to improve the signal-to-noise of the system. This window technique averages out the noise spread out in the spectrum and thus reduces the signal loss by minimizing peak to average power ratio. The results are analyzed and compared with the existing conventional methods. Finally, the reductions in PAPR, BER and CCDF obtained are discussed in the results and comparison section. The proposed work has a higher signal-to-noise ratio than the conventional methods.