论文标题

在ASO-S任务上的硬X射线成像仪(HXI)光谱仪的发射前表征

Pre-launch characterization of the spectrometer of Hard X-ray Imager (HXI) onboard the ASO-S mission

论文作者

Liu, W., Zhang, Z., Wu, J., Ma, T., Zhang, Y., Hu, Y. M., Zhang, Y. Q., Huang, Y. Y., Wang, H. X., Jiang, X. K., Chen, D. Y.

论文摘要

作为高级太空太阳能天文台(ASO-S)的三个有效载荷之一,HXI的发射前表征包括准直仪和光谱仪的表征。本文重点介绍了HXI光谱仪的发布前表征,包括检测效率,能量分辨率和对ADC通道(E-C)关系的能量。检测效率表征需要在HXI观察能范围内足够数量的校准能点,并在灯笼溴化物晶体的吸收边缘周围进行精制测量,并用X射线梁进行校准。表征结果与模拟一致,并表明检测器模块之间的检测效率差在$ \ pm3 \%$之内。放射性源$^{133} \ textrm {ba} $和$^{137} \ textrm {cs} $用于校准能量分辨率和E-C关系。表征结果表明,所有检测器模块的能源分辨率都大于32 KEV的$ 26 \%$,符合设计规范。他们的E-C关系定期随电压而异。所有表征结果表明,HXI光谱仪的飞行模型符合性能要求,并能够执行轨道观察活动。

As one of the three payloads of the Advanced Space-based Solar Observatory (ASO-S), the pre-launch characterization of HXI includes the characterization of the collimator and the spectrometer. This article focuses on the pre-launch characterization of HXI's spectrometer, including detection efficiency, energy resolution, and energy to ADC channel (E-C) relationship. The detection efficiency characterization necessitates a sufficient number of calibrated energy points in the HXI observation energy range, with a refined measurement around the absorption edge of the lanthanum bromide crystal, and is calibrated with an X-ray beam. The characterization results are consistent with the simulations and show that the detection efficiency difference between detector modules is controlled within $\pm3\%$. Radioactive sources $^{133}\textrm{Ba}$ and $^{137}\textrm{Cs}$ are used to calibrate the energy resolution and E-C relationship. The characterization results show that all detector modules' energy resolutions are better than $26\%$ at 32 keV, meeting the design specification. And their E-C relationships vary regularly with voltage. All of the characterization results indicate that the flight model of the HXI spectrometer meets the performance requirements and is capable of performing on-orbit observation activities.

扫码加入交流群

加入微信交流群

微信交流群二维码

扫码加入学术交流群,获取更多资源