论文标题
铍瓷砖键合资格活动的状态，用于制造Iter第一墙
Status of the Beryllium Tile Bonding Qualification activities for the Manufacturing of the ITER First Wall
论文作者
论文摘要
iTer第一墙制造的制造涉及资格阶段。该资格旨在证明制造商可以在制造业开始之前，在制造业开始之前，可以为铍提供所需的可靠性和质量。该资格是在半原型上完成的，其中包含相对于铍装甲的相关特征（面板尺寸的约1/6）。该资格由参与方完成，首先是由制造半原型制造，然后通过在热量下进行测试。一种半概况正在制造并正在测试中，与其他制造商相距甚远。资格计划伴随着债券缺陷调查，旨在定义缺陷接受标准。资格和缺陷接受计划得到热和压力分析的支持，对热结果有良好的一致性，以及关于粘结损害的管理因素的一些见解。迭代，第一壁，资格，原型，高热通量测试。
The preparation of the manufacturing of the ITER first wall involves a qualification stage. The qualification aims at demonstrating that manufacturers can deliver the needed reliability and quality for the beryllium to copper bond, before the manufacturing can commence. The qualification is done on semi-prototype, containing relevant features relative to the beryllium armour (about 1/6 of the panel size). The qualification is done by the participating parties, firstly by a manufacturing semi-prototype and then by testing it under heat flux. One semi-prototype is manufactured and is being tested, and further from other manufacturers are still to come. The qualification program is accompanied by bond defect investigations, which aim at defining defect acceptance criteria. Qualification and defect acceptance program are supported by thermal and stress analyses, with good agreement regarding the thermal results, and some insights about the governing factors to bond damage. ITER, First Wall, Qualification, prototypes, high heat flux tests.
