论文标题
使用光闪光灯确定电子束的能量特性
Determination of the Energy Characteristics of an Electron Beam using a Light Scintillator
论文作者
论文摘要
当电子束穿过它以确定低和中等能梁（吸收能量法）的能量特性时，在光闪烁体中使用全能吸收的可能性（实验表明）。使用闪烁探测器的P. N. Lebedev物理研究所的Pakhra加速器的准单色电子束对厚度为14.5、20、23.5和51.2 cm的能量校准。对于电子束能量，高达约100 MeV和闪烁检测器的厚度从5到20 cm，电子束能量确定的精度分别为10％至20％。
The possibility of using the effect of full energy absorption in a light scintillator when an electron beam passes through it to determine the energy characteristics of a low and medium energy beam (the absorbed energy method) is experimentally presented. The energy calibration of the quasi-monochromatic electron beam of the Pakhra accelerator of the P. N. Lebedev Physical Institute of the Russian Academy of Sciences using scintillation detectors with a thickness of 14.5, 20, 23.5 and 51.2 cm was performed. For electron beam energies up to about 100 MeV and scintillation detector thicknesses from 5 to 20 cm the accuracy of electron beam energy determination was 10 to 20%, respectively.
